SetUnionControlNetType - ComfyUI Built-in Node Documentation - ComfyUI

The SetUnionControlNetType node lets you choose which control type a control network uses. It takes an existing control network and creates a modified copy with the selected control type, leaving the original control network unchanged. When “auto” is selected, the stored control type is cleared so the type can be detected automatically.

Inputs

Parameter	Description	Data Type	Required	Range
`control_net`	The control network to modify with a new type setting	CONTROL_NET	Yes	-
`type`	The control network type to apply. Use “auto” for automatic type detection or select a specific control network type from the available options (default: “auto”)	COMBO	Yes	`"auto"` `"openpose"` `"depth"` `"hed/pidi/softedge"` `"canny"` `"scribble"` `"seg"` `"tile"` `"inpaint"` `"lineart"` `"blur"` `"mlsd"` `"normalbae"` `"mask"`

When type is set to "auto", the node clears the stored control type so the type can be detected automatically. When a specific type is selected, the node stores the matching control type in the copied control network.

Outputs

Output Name	Description	Data Type
`control_net`	The modified control network with the specified type setting applied	CONTROL_NET

This documentation was AI-generated. If you find any errors or have suggestions for improvement, please feel free to contribute! Edit on GitHub

Source fingerprint (SHA-256): db4b1a3cebafcff2be3172faa09cecbd5e19331376491c491cbe359013ed3da3